Made to order · printed in 2–3 working days · free UK delivery over £60
SplitOne
3D Printed Personalised Race Suit Hanger with Glove Holder, Karting Gift — photo 141/16
Best seller

3D Printed Personalised Race Suit Hanger with Glove Holder, Karting Gift

£37.90ships in 2–3 working days

Everything from race day in one place: the suit on the shoulders, a glove in each of the two lower loops and the balaclava on the centre hook. Hang it on the wall mount and your kit dries out together, ready for the next session. Make it yours: choose the hanger colour and the stripe colour, and add your name, team name, race number or logo on the centre plate.

Hanger colour

Hanger colour: Black

Lines/Text colour

Lines/Text colour: Black

Personalisation — free

1

Product details

  • Product type: race suit hanger with wall mount
  • Dimensions: hanger 46 × 21 × 3.4 cm; hook opening approx. 4 cm; wall mount hook 3.4 × 10.5 × 8 cm (holds the hanger 7 cm from the wall); wall mount base 4 × 9 × 1.4 cm
  • Weight: hanger approx. 275 g, wall mount approx. 75 g
  • Colour: your choice (shown in grey with green stripes)
  • Material: PLA, a plant-based plastic
  • Production method: 3D printed
  • Assembly: the hanger arrives in 4 pieces (centre, two arms and the centre hook) to keep the parcel small. They slide together by hand in under a minute, no tools or glue. The joints are snug, and come apart again with a firm pull.
  • Included: the hanger in 4 pieces with the stripes and plate already fitted; the kit also includes the wall mount hook and base, 2 screws and 2 wall plugs for brick or block walls
  • Intended use: storing a race suit, gloves and balaclava indoors
  • Age: 14+, household item, not a toy

Why you'll love it

  • Two closed loops at the bottom hold a pair of race gloves, one on each side
  • Centre hook for the balaclava or a helmet bag
  • Wide 46 cm shoulders, 3.4 cm thick, so the suit rests on a broad surface rather than a thin wire
  • Fits adult race suits, jackets and hoodies
  • Wall mount included in the kit: the hanger lifts on and off in a second
  • Also hangs on a standard wardrobe rail

Personalisation

Tell us your choices in the personalisation box. If you leave it blank, we make it in black with red stripes and no plate.

  • Hanger colour and stripe colour: your choice from our colour chart (see photos)
  • Centre plate (+£3), with either:
  • text: up to 3 lines, up to 10 characters per line (name, team name, race number), or
  • your logo in one colour (send us the file after ordering: SVG, PDF or a clear PNG) The text or logo is printed in the stripe colour on a plate in the hanger colour, and the plate fits flush into the centre of the hanger.
  • Logo in more than one colour? Message us before ordering for a quote.

Made to order

Each hanger is printed in your colours after you order. Small layer lines are part of the 3D printing process and are not a defect.

Care

Wipe clean with a damp cloth. For indoor use. Keep away from heat above 45 °C, such as a hot car or a direct heater.

Wall mount

Screw the base to the wall with the screws and plugs included, then slide the hook down onto it. For plasterboard, use cavity fixings (not included). Please don't use adhesive strips.

This is an original design. It is not affiliated with or endorsed by any racing series or team.

Reviews

No reviews yet. Bought this piece? Use the link in your delivery email to leave the first one.

Goes well with